Update:
Consider my 2nd unit update here: https://www.limscave.com/viewsonic-xg2703-gs
here is the black uniformity video: https://www.limscave.com/media/viewsoni ... d_unit.mp4

All measuring datas from the ViewSonic XG2703-GS review. Suggestions, questions, critism, and new ideas? Post them in here.

ICC Profile here: https://limscave.de/media/viewsonic_xg2 ... 703-GS.icm

Very important to the topic "the optimal OSD settings".
https://limscave.com/viewtopic.php?f=8& ... 4a485789ce





Measured contrast, brightness and black point





Measurements presets








Measurement on optimal Settings








Measurement calibrated






UFO Testscreen:


Ufotest: https://limscave.de/media/viewsonic_xg2 ... fotest.jpg


Crosstalk: https://limscave.de/media/viewsonic_xg2 ... sstalk.jpg






Backlight Strobing:




Homogenity:



Review Updates:

Nothing yet.

Also purchased this monitor during Black Friday sale. However, I may return this unit due to lack of color uniformity. I have an annoying yellow tint (only visible on white) on the left side of the monitor. IPS glow and backlight bleed are barely noticeable at full brightness.

Is there anything I can tweak on the color temperature to get rid of the yellow tint?
Pictures can be found here:

http://www.overclock.net/t/1591488/view ... t_26468716

Hey, oh man the color uniformity issue looks a pretty annoying :O I've also bought the Viewsonic and here is my second's unit black uniformity: https://www.limscave.com/media/viewsoni ... d_unit.mp4

Your issue is something you cannot really fix with software etc. It's just a bad illumination

My unit also is not perfect in the color temperature homogeneity and I'm thinking to exchange - Not decided yet.

lim wrote: ↑

02 Dec 2017, 15:40

Hey, oh man the color uniformity issue looks a pretty annoying :O I've also bought the Viewsonic and here is my second's unit black uniformity: https://www.limscave.com/media/viewsoni ... d_unit.mp4

Your issue is something you cannot really fix with software etc. It's just a bad illumination

My unit also is not perfect in the color temperature homogeneity and I'm thinking to exchange - Not decided yet.

I was able to „fix“ my color uniformity issue by setting RGB to 100 each and increasing brightness to 80%! No white is very uniform and only some greys look darker on the left side. I will definitely keep my unit because glow and backlight bleed are hardly noticeable even at 100% brightness.

Hey, nice to hear you could fix it. On native everything should already be on 100 (rgb) - I cannot use Brightness 80% while it strains the eyes too much. Have the Viewsonic atm also again and the white uniformity also is not really perfect